Before Making Copies
Positioning a Sheet Original
Use the following procedure to position plain paper or an original that is
not suitable for use in the Auto Document Feeder.
1
Raise the Auto Document Feeder or Original Cover.
2
Place the original face down on the
Original Glass.
3
Position the original on the Original
Glass so that the corner of the
original aligns with the arrow in the
upper-left corner of the Original
Scales.
4
Gently lower the Auto Document
Feeder or Original Cover.
5
Specify the desired copy settings.
H
"Making Copies" on page 4-1
6
Press the [Start] key to start the copy cycle.
Di1610/Di1610p
3
3-25