Before Making Copies
Turning On the Copier
When the copier is turned on, the indicator on the [Start] key lights up in
orange.
After a few seconds, the message "Warming up Pre-program a job."
appears on the touch panel and the [Start] key indicator lights up in green.
At this time, a delayed copy job can be specified. (Refer to page 3-25.)
However, even though the [Start] key is pressed, the copy operation is not
performed until the copier has finished warming up (after about 5 minutes
at normal room temperature (20°C/68°F)).
Default Settings
The Basic screen, which appears on the touch panel when the copier is
turned on, displays the default settings. The Basic screen serves as a
reference for all settings that are to be made.
Default settings
G
Number of copies: 1
G
Original Image Type: Text&Photo
G
Zoom: Full Size (×1.000)
G
Paper: Auto Paper
Orig. Ö Copy: Single-Sided Ö Single-Sided
G
G
Finishing: Non-Sort
Tip
The default settings can be customized using the "User's Choice"
function. (Refer to page 8-1.)
CF1501/CF2001
3
3-29