To Select The Finishing Settings - Minolta CF1501 Manual

Advanced Operations
Setting
Group
* A print job is a print command sent from a computer to the optional printer controller, then
printed by this machine.

To select the finishing settings

1
Position the document(s) to be copied. (Refer to page 5-1 for more
details.)
2
Select the desired color mode. (Refer to page 3-19 for more details.)
3
Touch [Finishing].
4
Select the desired finishing settings.
The screen shown at the right
appears when the 10-mailbin sorter
(JS-1002) is installed. If the finisher
is installed, [Sort] and [Group] do
not appear.
5
Specify any other necessary settings.
6
Using the keypad, enter the number of copies you wish to make, and
then press the [Start] key.
CF1501/CF2001
Options Installed
10-Mailbin Sorter (JS-
1002)
Operation
For a copy job, the output is fed into mailbin
1.
The number of mailbins that can be used to
receive the output can be set between a
maximum of 10 and a minimum of 2,
according to the "Mail Bin Assignment"
parameter setting. For more details, refer to
the section "To set the "Mail Bin
Assignment" parameter" on page 8-14.
7
7-11