Erasing Copy Edges ("Erase" Function); To Set The "Erase" Function - Minolta CF1501 Manual

9
9.4

Erasing Copy Edges ("Erase" Function)

This function can be used to set the width of loss at the edge of the copy
to either 5 mm (0.2 in.) or 7 mm (0.3 in.), as needed. The default setting
is 5 mm (0.2 in.).

To set the "Erase" function

Note)
✔
Discuss any changes to this function with your service representative.
1
Press the [Utility] key to enter Utility
mode.
2
Touch [Administrator Mode].
3
Using the keypad, enter the four-
digit administrator access code.
9-18
Administrator Mode Operations
CF1501/CF2001