Precautions; Installation Precautions; Installation Site; Power Source - Minolta CF1501 Manual

Precautions

2 Precautions
2.1

Installation Precautions

Installation site

To ensure utmost safety and prevent possible malfunctions, install the
copier in a location that meets the following requirements.
-
A location away from curtains, etc. that may catch fire and burn easily
-
A location that is not exposed to water or other liquids
-
A location free from direct sunlight
-
A location out of the direct airflow of an air conditioner or heater, and
not exposed to extremely high or low temperatures
-
A well-ventilated location
-
A location that is not exposed to high humidity
-
A location that is not extremely dusty
-
A location not subjected to undue vibrations
-
A stable and level location
-
A location where ammonia or other organic gases are not generated
-
A location that does not put the operator in the direct airflow of exhaust
from the copier
-
A location that is not near any kind of heating devices

Power source

The power source requirements are as follows.
G Voltage fluctuation: Maximum ±10%
(AC 127 V areas only: between –10% and +6%)
G Frequency fluctuation: Maximum ±0.3%
❍ Use a power source with as little voltage or frequency fluctuations as
possible.
CF1501/CF2001
2
2-1