Other Messages - Minolta CF1501 Manual

10
10.9

Other Messages

Message
Malfunction detected.
Call your Technical Rep. and
provide code:
Please input your 4-digit
Access# and press the
Access key.
Replenish paper.
Please add Toner.
Open the Toner Supply Door
and follow the Operator's
Manual.
Please add XXXX Toner.
Please install the correct
Imaging
Unit correctly, and close all
doors.
Please insert the Image
Transfer
Belt Unit and close all doors.
Please insert Waste Toner
Bottle
and close all doors.
Please insert the Fusing Unit
and
Fusing Web Unit and Oil
Coating Unit
and close all doors.
Close Section properly.
Replace Staple Cartridge X.
Misfeed detected.
Remove misfeed at O.
The Exit Tray has reached its
capacity. Please remove all
pages from -> section tray.
10-44
Cause
The copier malfunctioned
and is unable to make
copies.
Access codes have been
specified. Copies cannot be
made unless a specified
access code is entered.
The indicated drawer has ran
out of paper.
Since the toner for the
indicated color has run out,
the copier is unable to make
copies.
The toner for the indicated
color is about to run out.
The indicated imaging unit is
not installed correctly.
The image transfer belt unit
is not installed correctly.
The waste toner bottle is not
installed correctly.
The fusing unit, fusing web
unit, and oil-coating unit are
not installed correctly.
Since a copier door or cover
is open or an option is not
installed correctly, the copier
is unable to make copies.
The staples have run out.
Since a paper misfeed
occurred, the copier is
unable to make copies.
Since the maximum amount
of copies for the indicated
finisher tray has been
exceeded, the copier is
unable to make copies.
Touch Panel Messages
Remedy
Inform your technical
representative of the code
displayed on the touch
panel.
Enter your access code.
p. 3-27
Load paper into the indicated
drawer. p. 10-1
Refill the toner. p. 10-6
Refill the toner. p. 10-6
Correctly install the imaging
unit. Otherwise, contact your
technical representative.
Contact your technical
representative.
Correctly install the waste
toner bottle. Otherwise,
contact your technical
representative.
Correctly install the fusing
unit, fusing web unit, and oil-
coating unit. Otherwise,
contact your technical
representative.
Make sure that all doors and
covers are closed and that all
options are installed
correctly.
Replace the staple cartridge.
p. 10-11
Clear the paper misfeed.
p. 10-16
Remove all copies from the
indicated tray.
CF1501/CF2001