Features and Components
3
Features and Components
3.1
Power Switch and Default Settings
Turning the Copier On and Off
To turn the copier on
§
Set the power switch to "I".
When the copier is turned on, the
indicator on the [Start] key lights up in
orange. A screen indicating that the
machine is starting up appears.
After a few seconds, the message "Now
warming-up. Ready to scan." appears
on the touch panel. When the indicator
on the [Start] key lights up in green, a
job can be queued.
To turn the copier off
1
Touch [Job Log] to check that no jobs are queued.
2
If any copies or printouts remain in the output tray, remove them.
3
Set the power switch to "O".
The following are cleared.
G
Settings that are not programmed, such as the number of copies
G
Data scanned using the "Scan to Memory" function
G
Jobs queued to be printed
G
Jobs saved with the "Memory Recall" function
Stored zoom ratios, programmed Copy mode settings, Utility mode
settings and UserBox settings are not erased.
CF2002/CF3102
3
3-1