Informational Messages - Xerox DocuPrint 180 Message Manual

SUMMARY SHEET ERROR MESSAGES

Informational messages

14-12
Informational Messages
Character nB is not in font "fileType>localFontName", set nB.
This message identifies character references beyond the last
character, highest character code, in an LPS font and follows ...Font
problem.... The substitute character appears in place of the invalid
character.
Action None.
In this message, the letter "B" indicates an octal value.
Note:
Cluster: "clusterName," Paper: "stockType"stock.
This message follows Please Define Clusters And Load Papers as
Follows: and instructs you to load the stock and define the cluster
name which includes the tray(s) containing the paper.
Action None.
Define CLUsters and load papers as follows:
Stock requests in the document are handled by defining temporary
cluster names. This message is displayed on the system controller
display and is followed by instructions for loading paper and defining
clusters.
Action 1. If printing stops and you are prompted to key in the CONTINUE
command, load the correct stock in the feeder trays.
2. Define the clusters as instructed.
3. Key in the CONTINUE command or press the <CONTINUE>
key.
Document generated comment (page n) = "commentString."
The document requested that a comment be added to the summary
sheet.
Action None.
Document Generated Comment "documentComment".
A comment field is taken from the printing instructions or protocol and
is displayed on the summary sheet.
Action None.
XEROX DOCUPRINT 180 LPS MESSAGE GUIDE