Xerox DocuPrint 180 Message Manual page 171

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
OS6561 Interpress error code = nn.
An error was detected by the Raster Image Processor (RIP). This
error message matches the error message on the Interpress
summary sheet for the document. The only code expected is 3758,
which indicates that the page is too complex to print with RIP.
Action 1. Download the RIP software via the PSC RIP command and
resend the document.
2. If the problem continues, contact your systems specialist or
Xerox Customer Service.
OS6562 Ink index out of range.
Ink-index % 0 out of range (1 - % 1).
You have specified an ink that is not available in the ink-index. Ink-
index values range from 1 to n (n is the number of inks in the ILIST).
The system default black ink will be substituted.
Action None.
OS6563 Exceeding ink capability of the printer.
You have requested a highlight color print job that your LPS cannot
process. You may have requested more than two color inks on a
page or a color that the LPS does not have.
Action Check the ink specifications on your job and modify them to meet the
printer's capabilities.
OS6564 Substituting black for this report.
The ink specified for your report is not available, therefore, automatic
ink substitution is taking place.
Action None.
OS6565 Unable to read IDR from disk.
Input cannot access IDR file from disk.
Action Check and retry.
OS6660 Begin value is off the page.
The BEGIN statement in JDL specifies that print is to start at a point
located off the paper currently loaded in printer. The job will abort.
Action Recode JSL so that paper dimensions (PAPERSIZE command)
agree with the BEGIN statement. (Refer to your Xerox DocuPrint 180
LPS PDL Reference .)
OSS (OPERATING SYSTEM SOFTWARE) MESSAGES
6-93