Numbered Xerox Docuprint 180 Lps Messages - Xerox DocuPrint 180 Message Manual

Numbered Xerox DocuPrint 180 LPS messages

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
Messages 7 through 36
Messages 7 through 36 appear when serious User Interface software
problems occur. For all of these messages, call for Xerox service.
Messages 41 and 42
41 At least one of the main UI windows did not create
Microsoft Windows cannot create a window required by the SysUI.
This may be due to a corrupt sysui.exe file, a coding error, or lack of
Windows resources.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
42 Failure of Unformat ESS Message
A message received from the system controller failed to properly
unformat.
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
Messages 44 through 48
Messages 44 through 48 appear when serious User Interface
software problems occur. For all of these messages, call for Xerox
service.
Message 538
Message 538 is a result of problems/warnings/status that could occur
during the processing of messages and signals/interrupts from the
system controller (ESS) or during the sending of commands to the
system controller.
538 Error writing to ESS
Writing to the system controller communication port failed while in
TEM (terminal emulation mode).
Action Select the OK header button to retry the process. If the problem
persists, call Xerox Customer Service.
Messages 540 and 541
Messages 540 and 541 appear when serious User Interface software
problems occur. For both of these messages, call for Xerox service.
Messages 544 through 574
Messages 544 through 574 are the result of problems/warnings/
status that could occur during the processing of messages and
signals/interrupts from the system controller (ESS) or during the
sending of commands to the system controller.
XEROX DOCUPRINT 180 LPS ADDITIONAL MESSAGES
15-3