Oss (Operating System Software) Messages; Os Level 0: Confirmation - Xerox DocuPrint 180 Message Manual

OS Level 0: Confirmation

XEROX DOCUPRINT 180 LPS MESSAGE GUIDE
6.
The OS messages appearing on your system controller display are
generated by the operating system software (OSS). These
messages are assigned to levels 0 through 9. The higher the
number, the more serious the problem or condition being reported.
The first digit after "OS" indicates the message level. For example,
OS7210 is a Level 7 message. Your Xerox DocuPrint 180 LPS
Operator Guide and Xerox DocuPrint 180 LPS Operations Reference
provide detailed information about LPS operations and related
messages.
Confirms that the Xerox DocuPrint 180 LPS is responding.
OS0010 Resuming input
The CONTINUE or CONTINUE I command was entered, or the
<CON> key was pressed. System is reading data onto the system
disk.
Action None.
OS0020 Resuming output
The CONTINUE or CONTINUE O command was entered, or the
<CON> key was pressed. The system is printing data from the
system disk.
Action None.
OS0030 System is "ONLINE"
The ONLINE command was entered. The system is ready to receive
data through a host channel.
Action None.
OS0040 System is "OFFLINE"
The OFFLINE command was entered. The system is not connected
to a host channel and is not able to receive data from a host.
Action None.
6OSS (operating system
software) messages
6-1