To Turn The Copier Off; When The Copier Is Turned Off - Konica Minolta 8020 Basic Operations

1.5 Turning the Copier On and Off

To turn the copier off

1
Touch [Job Log] to check that no
jobs are queued.
2
If any copies or printouts remain in
the output tray, remove them.
3
Set the power switch to "O".
Note
Do not turn off the copier while it is making copies or printing, otherwise a paper
misfeed may occur.
Do not turn off the copier while it is scanning or sending or receiving data, oth-
erwise all scanned data or transmission data will be deleted.
Do not turn off the copier while a queued job or stored data is waiting to be print-
ed, otherwise the jobs will be deleted.

When the copier is turned off

G The following are cleared.
H Settings that are not programmed, such as the number of copies
H Jobs queued to be printed
H Data scanned using the "Scan to Memory" function
H
Jobs saved with "Memory Recall" function
G
Stored zoom ratios, programmed Copy mode settings, Utility mode settings and
UserBox settings are not erased.
Konica 8020/8031
1
1-19