Loading Paper Into The Large Capacity Tray - Konica Minolta 8020 Basic Operations

3.5 Loading Paper

Loading Paper Into the Large Capacity Tray

1
Pull out the paper drawer.
2
Load paper into the right side of the
drawer so that the front side of the
paper (the side facing up when the
package was unwrapped) faces up.
Note
If the paper is curled, flatten it before loading it.
Do not load so much paper that the top of the stack is higher than the Ä mark.
Paper other than plain paper cannot be fed from the large capacity tray.
If you wish to make copies onto paper other than plain paper, feed it through
the manual bypass tray or the 1st drawer.
When loading additional paper, remove any paper remaining in the drawer,
place it on top of the new paper, and then align the paper in the stack well
before loading it into the drawer. We recommend replenishing the paper
only after all of the paper in the drawer has been used, otherwise a paper
misfeed may occur.
3
Load paper into the left side of the
drawer so that the front side of the
paper (the side facing up when the
package was unwrapped) faces up.
Note
Do not load so much paper
that the top of the stack is high-
er than the Ä mark.
Paper other than plain paper cannot be fed from the large capacity tray.
If you wish to make copies onto paper other than plain paper, feed it through
the manual bypass tray or the 1st drawer.
The paper guide in the large capacity tray has been installed for A4 C-size
paper. To use B5 C-size paper, consult your authorized service representa-
tive.
When loading additional paper, remove any paper remaining in the drawer,
place it on top of the new paper, and then align the paper in the stack well
before loading it into the drawer. We recommend replenishing the paper
only after all of the paper in the drawer has been used, otherwise a paper
misfeed may occur.
4
Close the paper drawer.
Konica 8020/8031
3
3-19