Practical Copy Examples; To Make A Copy That Is The Same Size As The Original - Konica Minolta 8020 Basic Operations

2.2 Practical Copy Examples

2.2 Practical Copy Examples
Examples of various basic copy operations are described below.
Refer to the following procedures for details on performing the various copy opera-
tions.
Note
These explanations assume that all functions, such as those available on the
Utility screen, are set to their default settings.
If any function has been customized, it may not be possible to perform the op-
erations as described below.

To make a copy that is the same size as the original

An example for making one single-sided copy that is the same size as the single-
sided original is described below.
Load the document into the duplexing document
feeder.
When loading the document, load it so that the side
that you wish to copy faces up and the top is toward
the rear of the copier. Then, adjust the document
guides to fit the size of the document.
Touch [Paper].
Make sure that paper of the same size as the
document is loaded into a paper drawer.
Make sure that the number of copies is set to "1".
Press the [START] key. The copy job appears in the
job display.
Copying is performed in the order that the job was
programmed.
Konica 8020/8031
A A
2
2-5