Entering Photocapture Mode; Print Images; View Photos - Brother DCP-6690CW User Manual

Entering PhotoCapture mode

After you insert the memory card or USB
Flash memory drive, press the
(Photo Capture) key to illuminate it in
blue and display the PhotoCapture options on
the LCD.
The LCD shows:
PhotoCapture PhotoCapture
View Enhance
Photos Photos
Press View Photos if you want to
quickly view and print your photos. See
View Photos on page 43.
Press Enhance Photos if you want to
add special effects to your photos. See
Enhance Photos on page 44.
Press Index Print if you want to print
an Index page (Thumbnails). You can also
print photos using the image numbers of
the Index page (Thumbnails). See Index
Print (Thumbnails) on page 45.
Note
If your digital camera supports DPOF
printing, see DPOF printing on page 46.
Printing photos from a memory card or USB Flash memory drive

Print Images

5

View Photos

You can preview your photos on the LCD
before you print them. If your photos are large
files there may be a delay before each photo
is displayed on the LCD.
a
Index
Print
b
Note
• Press d or c to scroll through all photos.
You can forward and rewind the
thumbnails by holding these keys. The
photo is not shown during this operation.
• Press
c
d
e
Make sure you have put a memory card
or USB Flash memory drive in the
correct slot.
Press (Photo Capture).
Press View Photos.
Do one of the following:
If you want to choose photos to print
or print more than one for an image,
go to step c.
If you want to print all photos, press
.
Press Yes to confirm.
Go to step f.
to start Slide Show.
Press and choose a photo from the
thumbnail.
Enter the number of copies you want
either by pressing the number or
pressing + or -.
Press OK.
Repeat step c and d until you have
chosen all the photos that you want to
print.
5
5
5
43