Attach Mounting Plate To Wall Cee - GE JVM3150 Installation Instructions Manual

B
Installation Instructions
OUTSIDE BACK EXHAUST (Horizontal Duct)
INSTALLATION OVERVIEW
B1. Prepare Rear Wall
B2. Attach Exhaust Adaptor to
Wall Plate
Attach Mounting Plate
to Wall
Prepare Top Cabinet
Adjust Blower
Mount the Oven
B3.
B4.
B5.
B6.
B1.
PREPARING THE REAR WALL
FOR OUTSIDE BACK EXHAUST
You need to cut an opening in the rear wall for outside
exhaust.
Read the instructions on the REAR WALL TEMPLATE.
Tape it to the rear wall, lining up with the holes
previously drilled for holes A and B in the wall plate.
Cut the opening, following the instructions of the REAR
WALL TEMPLATE.
15
B2.
ATTACH THE EXHAUST ADAPTOR TO
THE OVEN REAR PANEL
[1 |Unscrew and remove the exhaust adaptor
assembly from the top of the oven.
| 2 |Attach the exhaust adaptor to the oven rear panel
by sliding it into the guides at the top
center of the back of the oven.
Damper
(hinge side up)
|
|
"A
Guide e | A o 9 .
atest | Ocking
lo 0 * Tabs
Push in securely until it is in the lower locking tabs. Take
care to assure the damper hinge is installed so that it is
at the top and that the damper swings freely.
eS
2