Advertisement
Available languages
Available languages
Installation
Instructions
I-6-1DRYER EXHAUST TO RIGHT, LEFT
OR BOTTOM CABINET
-/kWARNING
- BEFORE PERFORMING
THIS EXHAUST INSTALLATION,
BE SURE TO
DISCONNECT
THE APPLIANCE
FROM ITS
ELECTRICAL SUPPLY. PROTECT YOUR HANDS
AND ARMS FROM SHARP EDGES WHEN
WORKING
INSIDE THE CABINET.
BE SURE TO
WEAR GLOVES
For downward venting, rotate elbow
sections so that elbow points downward
REMOVE
KNOCKOUT
(ONLY 1)
0
ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT OR RIGHT SIDE OF
CABINET
• For side ducting, remove the knockout (ONLYZ).
Rotate elbow sections so that the points to the side.
Preassemble 4" elbow with 4" duct. Use only 4" UL
approved rigid metal for ducting inside the dryer.
• Insert duct assembly through the side opening and
connect to the internal elbow.
-4LCAUTION:
Be sure not to pull or damage
the electrical wires inside the dryer when inserting
the duct.
4" ULopproved rigid metol
!
TAPE
• Apply duct tape as shown on the joint between the dryer
internal duct and the straight duct pipe.
- CAUTION:
Internal duct joints must be
secured with tope, otherwise
they may separate and cause
a safety hazard.
9
Advertisement
