Assembly And Setup; Parts And Materials; Siting Requirements; Unpacking - Star Trac Instinct Owner's Manual

A S
SSEMBLY AND ETUP

PARTS AND MATERIALS

The following parts are included with the STAR TRAC INSTINCT GLUTE PRESS:
1 Frame, Weight Stack
2 Frame, Main
3 Crossbeam, Upper
4 Crossbeam, Lower
5 Handgrip, Left Side
6 Handgrip, Right Side
14 Shroud, Lower, Front
15 Shroud, Lower, Rear
16 Cushion, Chest
17 Retainer, Belt
19 Guide Post, Weight Stack
20 Belt
21 Shroud, Upper
22 Plate, Top, Weight Stack
24 Weight, 5lb
T R
OOLS EQUIRED
Most STAR TRAC INSTINCT machines can be assembled using the following tools:
Metric Hex Key Wrenches - 2.5mm, 5mm, 6mm, 8mm,
10mm
Metric Open-End Wrenches - 10mm, 15mm, 17mm
Metric Ratchet Socket Wrench Set (including 17mm sock-
et)
Torque Wrench
Your INSTINCT GLUTE PRESS includes a hex key set and combination open-end wrench.

SITING REQUIREMENTS

Your INSTINCT GLUTE PRESS requires approximately 32 square feet of floor space to ensure safe operation of the unit.

UNPACKING

Your INSTINCT GLUTE PRESS is shipped in one or more shipping cartons. Each carton will generally contain one subassem-
bly of the entire unit. To unpack:
Remove the shipping straps from the outside of each shipping carton.
Open the top of each carton and fold back all four flaps.
Remove the packing materials, foam inserts, and ALL parts from each shipping carton. Keep the contents of each carton in
a separate area to facilitate assembly. To ensure personal safety during assembly, place all packing materials outside the
assembly area.
Verify that all parts listed above are included in your shipment.
Take time now to enter your INSTINCT GLUTE PRESS serial number in the space below. If parts are missing, or if you have
any operational questions, please call Star Trac's Service department at (800) 503-1221; have your serial number ready.
Serial No. __________________________________________
6
1 25 Weight, 10lb
1 26 Weight, 15lb
1 28 Cap, Rubber
1 33 Support, Weight Stack
1 27 Selector Pin
1 37 Nut, Tapped Hole
1 39 Screw, Button Head Socket Cap, 8X20M
1 41 Screw, Retaining
1 42 Screw, Button Head Socket Cap, 10X30M
2 44 Screw, Button Head Socket Cap, 10X80M
2 46 Screw, Button Head Socket Cap, 10X130M
1 48 Lock Nut, Nylon Insert, 10M
2 49 Washer, 11M
1 50 Washer, 9M
3
Channel Lock Pliers
Vice Grip Pliers
Rubber Mallet
Phillips Head Screwdriver - #2
STAR TRAC INSTINCT GLUTE PRESS O
L
ABELS AND
3
3
2
2
1
6
6
2
2
2
10
10
25
6
' M STAR TRAC INSTINCT GLUTE PRESS O
WNER S ANUAL
P
LACARDS
Pinch Points.
Keep hands away
from moving parts.
' M
WNER S ANUAL
15