Table of Contents
Advertisement
➪ ➪ ➪ ➪ ➪
To remove the right cover
1
Disconnect the power and the interface cables.
2
Remove the printer's top cover.
3
Remove the three screws which attach the cover to the right plate.
4
Move the right cover, being careful to clear the parallel port on the
back of the unit.
➪ ➪ ➪ ➪ ➪
To remove the DIMMs
1
Facing the top of the DIMMs, push the side clips gently to the outside
(away from the DIMM) until the DIMM is released from the socket.
2
The DIMM should pop up. Lift the DIMM straight up out of the socket.
ENCAD
T-200
Reference Guide
®
TM
DIMM Slots
Installing additional memory A-2
Advertisement
Table of Contents
