Table of Contents
Advertisement
To set margins
Choose Setup Menu/Paper Options/Margins.
1
2
Press Select.
3
Use the up or down arrow button to display the desired margin type; Normal
or Expanded.
4
Press Select.
Auto-Cut
When the Auto-Cut option is set to on, the printer automatically cuts the media when
the image is complete. Be sure the image is dry before cutting, turn on the dryer and/or
specify a Dry Time. See "Setting a Dry Time" in this chapter for the procedure. You can
press the Shortcut button on the control panel and select Cut at any time to cut the
media.
Note: Automatic cutting is disabled when the paper option is set to Sheet.
To set Auto-Cut
1
Choose Setup Menu/Paper Option/Auto-Cut.
2
Press Select.
3
Use the up or down arrow button to display On or Off.
4
Press Select.
Save Media
When the Save Media is On (the default), the media advances only as far as needed to
print the image. With the Save Media option turned off, the printer advances the full
print area of the loaded media. For example, if a 36 inch roll is loaded, the printer
advances the length of the print area for a standard 36 x 48" sheet even if the printed
image is only 30 inches long.
To turn off Save Media
1
Choose Setup Menu/Paper Options/Save Media.
2
Press Select.
3
Use the up or down arrow button to display Off.
4
Press Select.
ENCAD
®
T-200
TM
Reference Guide
Printer Options 2-13
Advertisement
Table of Contents
