Table of Contents
Advertisement
Installing software
Your printer comes with the following software drivers and utilities on the CD:
• AutoCAD HDI Version 6 Driver - Use this driver for AutoCAD 2000 and AutoCAD
LT 2000.
• AutoCAD HDI Version 7 Driver - Use this driver for AutoCAD 2000i, AutoCAD LT
2000i, AutoCAD 2002 and AutoCAD LT 2002.
• AutoCAD ADI Driver - Use this driver for AutoCAD R12, R13 and R14.
• Basic Windows Driver for Windows 95/98/NT/2000/ME - Use this driver for
printing from applications other than AutoCAD. ICC Color Profiles are included for
the Windows driver.
• ENCAD File Print Utility (EFPU) - Use this utility to send pre-ripped files to the
printer and to download new firmware release. Note: This utility requires the Win-
dows driver be installed on the same port that is used for the EFPU.
It is not necessary to install all the drivers. You only need to install the ones that you
need. You should review the entire installation instructions before starting the installa-
tion.
Windows driver
The basic Windows driver lets you print from Windows-based applications.
Note: If you install the Windows driver, make sure you install the ICC Color Profiles.
The profiles are necessary to get the best image quality using the Windows driver.
➪ ➪ ➪ ➪ ➪
To install the Windows driver
1
Insert the CD into your CD drive.
2
Click on Applications.
3
Click on Printer Driver and follow the on-screen instructions.
ENCAD
T-200
Reference Guide
®
TM
Printer Setup 1-18
Advertisement
Table of Contents
