Table of Contents
Advertisement
HDI version 6 and 7 drivers
The HDI (Heidi) Version 6 and 7 drivers let you print to Encad printers from within
AutoCAD. Provided on CD-ROM, updated versions can be downloaded from Encad's
website (www.encad.com).
Install the driver without setting any Encad printer-specific features during installation.
Once installation is complete, you can configure the driver to your requirements. Assis-
tance with configuration and use of AutoCAD is found in extensive on-line Help files,
which include videos.
Note: The Heidi driver requires that a Windows driver be installed to same port that the
driver uses. Make sure you install the Windows driver as described in the previous
section before installing the Heidi driver.
➪ ➪ ➪ ➪ ➪
To install the Heidi 2000 driver
1
Insert the CD into your CD drive.
2
Click on Applications.
3
Click on Heidi Driver.
4
Click on Install HDI Driver, then click on the Unzip button.
5
If you have a previous version of the ENCAD Heidi driver, a dialog will display
asking if you want to overwrite the previous files. Click YES TO ALL. Then click OK
after the files are installed.
6
Start AutoCAD 2000.
7
From the File menu, select Plotter Manager. Then double-click on Add-A-Plotter-
Wizard.
8
After reviewing the Introduction Page, click NEXT.
9
In the Begin dialog, accept the default: My Computer and click NEXT.
10 In the Plotter Model dialog, click on ENCAD in the left list box (under manufactur-
ers) and then select your printer from the right list box (under models). Click NEXT.
11
In the Import PCP or PC2 dialog, select IMPORT FILE only if you have PCP or
PC2 files from AutoCAD 13 or 14 to import. (If you do want to import files at this
time, you will need the correct file names for entering here.) Otherwise, click NEXT.
ENCAD
T-200
Reference Guide
®
TM
Printer Setup 1-19
Advertisement
Table of Contents
