Ordering Supplies - Kodak 5500 Maintenance Procedures

Document preparation and
feeding

Ordering supplies

8
Following are the steps to prepare and feed your documents into
the feeder.
1. Verify all proper adjustments have been made to the feeder
side guides and exit hopper side guides. You are now ready to
feed documents into the transport.
2. Press Run.
3. Select a stack of documents.
4. Place the stack of fanned documents into the feeder so the
leading edge of the top document contacts the feed and
separator rollers. The documents will be drawn into the
transport with the top document being fed first. The
documents will be deposited into the exit hopper face down, in
the order in which they were fed into the transport.
5. To feed thicker documents (card stock and cover stock), press
the gap release lever down and hold it until the document is
fed. Only one thick document can be fed at a time.
This completes the adjustment procedure for feeding documents
into the Semi-Automatic Feeders for Imagelink and Digital
Science Scanners. If you need further assistance, call the Kodak
Customer Service Center at 1-800-52-KODAK.
The following products and supplies are available through your
normal ordering channels.
Description
Kodak Starter Cleaning Kit
7500/5500/500
Video Tape
Cleaning Instructions*
Transport Cleaning Sheets
(1 envelop of 50 sheets)
Roller Cleaning Pads
(1 bag of 24 pads)
Staticide Wipes
(6 boxes with 24 wipes per box)
* Additional copies of this publication can be ordered through BIS
Customer Service Center in Rochester.
Phone: 1-800-828-5921
Fax: 1-800-535-4622
Written requests to:
Eastman Kodak Company
BIS Order Desk
901 Elmgrove Rd.
Rochester, NY 14653-6204
Catalog Number
813-9040
147-8213
A-61603
169-0783
853-5981
896-5519
A-61603 September 1998