Continuous Forms ("FRONT")
Continuous Forms Specifications
Width
• Minimum: 4" (102 mm)
• Maximum: 16" (406 mm)
Single Thickness Forms
• Weight range: 14 to 34 lb. US Bond (52 to 128 g/m
Multi-part Forms
Normal Print Mode (the printer default)
• up to 6-part forms (original + 5)
• Maximum Thickness: 0.0142" (0.36 mm)
High Impact Mode
• up to 8-part forms (original + 7)
• Maximum Thickness: 0.0189" (0.48 mm)
Note To switch between Normal and High Impact mode, see
page 23.
Loading Continuous Forms
1. Push the sheet supports in and lift the sheet feed platform
Microline 8480FB User's Guide
Loading Print Media • 20
2
)