Oki Microline 8480 FB User Manual page 53

Skip Over Perf.
Sets what happens when the printer comes within 1-inch (25 mm)
of the bottom of the page. The default is No, for use when your
software has its own page formatting controls. Change to Yes if
you want the printer to go to the next page when it comes within
1" (25 mm) of the bottom of the page.
Style
The default is Normal. Choose Italic if you want the printed
characters to be slanted.
TOF
Top of Form sets the position down from the top of the page at
which printing starts. The default is 6.35 mm (1/4") from the top
of the page to the vertical middle of the first print line.
Note The amount of adjustment is limited to avoid paper jams.
Manual feed settings: 2.12 mm (1/12"), 3.18 mm (1/8"), 6.35
mm (1/4"), 7.62 mm (3/10"), 8.47 mm (1/3")*, 10.58 mm
(5/12"), 23.28 mm (11/12"), 25.4 mm (1"), 27.52 mm (13/12"),
1 Chr. Set Pos.
Continuous form settings: 2.12 mm (1/12"), 3.18 mm (1/8"),
6.35 mm (1/4"), 8.47 mm (1/3")*, 10.58 mm (5/12"), 19.05 mm
(9/12"), 23.28 mm (11/12"), 25.4 mm (1"), 27.52 mm (13/12"),
1 Chr. Set Pos.
* When 1/3-inch is selected, the distance is from the top of the
page to the top of the first print line, not the vertical middle.
TOF Adj. (Cut)
For fine tuning the Top of Form (TOF) location when using manual
feed from the platform. Settable from -40 to +40 in increments of
1/120 inch. The default is 0.
Negative values decrease the space down from the top of the
form:
• TOF moves up
• paper moves down.
Positive numbers increase the space down from the top of the
form:
• TOF moves down
Explanation of Function Setting Menu Items • 53
Microline 8480FB User's Guide