Oki Microline 8480 FB User Manual page 24

High Impact to Normal Print Mode
Press LF / NORMAL PRIN.
The LED beside HIGH IMPACT goes out and NORMAL
appears at the end of the first line of the display.
Switching between Single Sheets and Continuous
Forms
Single Sheets to Continuous Forms
(Manual Feed to Front Feed)
1. With the printer turned on, press SEL to place the printer off line.
2. If there is a single sheet loaded into the printer, press LOAD to
eject it.
3. Press MODE once or twice until you see FRONT on the second
line of the display.
The printer switches paths and returns to the on-line state.
4. If there are continuous forms in the parked position, the printer
automatically pulls them into the print position.
5. If continuous forms are not loaded, the display prompts you to
INSERT PAPER
page 20) and press LOAD to advance them to the print position.
Continuous Forms to Single Sheets
(Front Feed to Manual Feed)
1. Press SEL to place the printer off line.
2. Press LOAD to park the continuous forms.
The continuous forms retract back to the tractors.
. Load continuous forms on the tractors (see
Microline 8480FB User's Guide
Loading Print Media • 24