Handling The Motherboard - SOYO SY-P4S DRAGON Ultra User Manual

Dragon ultra mpga socket 478 processor supported agp/pci motherboard 400 mhz front side bus supported atx form factor
Table of Contents

Advertisement

Motherboard Description
5VSB Indicator
This green LED gives an indication of the presence of the 5V Standby voltage.
This voltage is always fed into the motherboard and is used for functions such
as WOL.
SOYO Bonus Pack CD-ROM
COMPLIANCE
The SY-P4S DRAGON Ultra complies with all important industry standards.
The following underlines the reliability of the SY-P4S DRAGON Ultra, a
motherboard to trust.
PC99, ACPI compliant
USER FRIENDLY
SOYO COMBO Setup
CPU FSB frequency
CPU multiplier
CPU Vcore voltage
4X AGP voltage
DDR RAM voltage
DDR RAM Clock
Pre-defined for system performance setup
Jumperless design

1-4 HANDLING THE MOTHERBOARD

To avoid damage to your Motherboard, follow these simple rules while
unpacking:
Before handling the Motherboard, ground yourself by grasping an
unpainted portion of the system's metal chassis.
Remove the Motherboard from its anti-static packaging. Hold the
Motherboard by the edges and avoid touching its components.
Check the Motherboard for damage. If any chip appears loose, press
carefully to seat it firmly in its socket.
Warning: Do not apply power if the Motherboard appears
damaged. If there is damage to the board, contact your dealer
immediately.
SY-P4S DRAGON Ultra
5

Advertisement

Table of Contents
loading

Table of Contents