Soyo Combo Setup - SOYO SY-P4S DRAGON Ultra User Manual

BIOS Setup Utility

3-1 SOYO COMBO SETUP

This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display on
screen. Then, select the [SOYO COMBO SETUP] option from the main
menu and press the <Enter> key.
CMOS Setup Utility – Copyright ( C ) 1984-2001 Award Software
System Performance
CPU:DRAM Clock Ratio
CPU Clock
DRAM Frequency
Ratio select
x CPU Clock Ratio
Auto Detect DIMM/PCI Clk
Spread Spectrum
CPU Vcore Select
DDR (2.5V) Voltage Select
AGP (1.5V) Voltage Select
Advanced DRAM Control
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
RAID/ATA & SCSI Boot Order
C.I.H. 4-WAY Protection
Onboard 6Ch H/W Audio
Onboard IDE RAID
SiS-900 10/100M ETHERNET
Move Enter:Select
F5:Previous Values
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.
SOYO COMBO Feature
Normal
1:1
100
100 x 2 MHz
Auto
8 X
Enabled
Disabled
Default
Default
Default
Press Enter
Enabled
Floppy
HDD-0
LS120
Enabled
RAID/ATA, SCSI
Disabled
Enabled
Enabled
Disabled
+/-/PU/PD:Value F10:Save
F6:Fail-Safe Defaults
39
SY-P4S DRAGON Ultra
Item Help
Menu Level
ESC:Exit F1:General Help
F7: Optimized Defaults