Table of Contents
Advertisement
5. The installation program will prompt users to insert the
floppy disk of driver. Please insert it and then press
to confirm.
6. In
the
UDMA/ATA RAID
7. The follow-on interface will list the devices to be installed,
in which
item should be included. (If users want to install other
devices, please operate at this time. If all devices have
been successfully installed, please go to next.)
8. Press
Install driver during Windows 2000 installation
1.
Go to "d:\raid\hpt372\" directory, (assuming that your
CD-ROM is drive d) copy all the files and directory to a
floppy disk.
2. If Windows 2000 is installed from the floppy drive, please let
the installing program run automatically. If Windows 2000 is
installed from the CD-ROM drive, please
message
or RAID driver
3. Press
S
2000 Setup
4. Insert the floppy disk of driver, then press
5.
The system will ask whether to install driver under
under
Windows
Windows 2000.
6. In the follow-on window of device type, please select
and press
7. The follow-on interface will list the devices to be installed, in
which
HPT370/HPT372 UDMA/ATA RAID Controller
should be included (If users want to install other devices,
follow-on
Controller, then press
HPT370/HPT372 UDMA/ATA RAID Controller
Enter
to continue the installation of Windows NT4.0.
Press F6 if you need to install third party SCSI
appears.
key to specify additional devices when the
window appears.
2000, please select to install driver under
Enter
to continue.
window,
select
112
Enter
HPT370/HPT372
Enter
to confirm.
F6
key when the
Windows
Enter
to continue.
WinNT
Other
item
or
Advertisement
Table of Contents
