Table of Contents
Advertisement
You may also refer to the brief help information at the bottom of the
Spare Pool Management window.
Note:
1. When a disk is added/removed to/from the spare pool, the
software will ask you to reboot the system, you can reboot at
once or later.
2. When there is no RAID 1 or RAID 0/1 array, if you want to add
a disk to spare pool, the spare disk will not take effect when the
array is broken.
3. When the capacity of spare disk can' t fit all the RAID 1 or
RAID 0/1 arrays, the spare disk will not take effect when the
arrays are broken.
Duplicating an Array
Duplicating will copy data from the source disk to the target disk to
ensure data consistency on the mirroring array. This operation will be
95
Advertisement
Table of Contents
