SOYO SY-P4S DRAGON Ultra User Manual page 22

Hardware Installation
Step 5 Connect cables, case wires, and power supply
A. IDE Device Installation (HDD, CD-ROM)
This Motherboard offers two primary and two secondary IDE device
connectors (IDE1, IDE2), can support up to four high-speed Ultra DMA
33/66/100HDD or CD-ROM. IDE3, IDE4 can support up to four high-speed
Ultra DMA 33/66/100/133 HDD or CD-ROM.
Connect one side of the ATA66/100 flat cable to the IDE device (HDD or
CD-ROM) and plug the other end to the primary (IDE1, IDE3) or secondary
(IDE2, IDE4) directionally keyed IDE connector on the Motherboard. The
ATA 66/100/133 cable is backward compatible with ATA33 HDDs.
This Motherboard can support up to 8 HDDs.
There are four HDD connectors (IDE1, IDE2, IDE3, IDE4) on motherboard.
IDE3 & IDE4 are provided for IDE RAID or standard IDE function. Please
refer to the Appendix A for more information on IDE RAID function.
SDRAM
SDRAM
□
SY-P4S DRAGON Ultra
Secondary
IDE 2
IDE
Primary
IDE 1
IDE
IDE 4 IDE 3
18
Pin -1