Handling The Motherboard; Electrostatic Discharge Precautions - SOYO SY-7IZM User's Manual & Technical Reference

Introduction

1-2 HANDLING THE MOTHERBOARD

To avoid damage to your Motherboard, follow these simple rules
while unpacking:
Ø
Before handling the Motherboard, ground yourself by grasping
an unpainted portion of the system's metal chassis.
Ø
Remove the Motherboard from its anti-static packaging. Hold
the Motherboard by the edges and avoid touching its
components.
Ø
Check the Motherboard for damage. If any chip appears loose,
press carefully to seat it firmly in its socket.
Warning: Do not apply power if the Motherboard appears
damaged. If there is damage to the board, contact your
dealer immediately.

1-3 ELECTROSTATIC DISCHARGE PRECAUTIONS

Make sure to ground yourself before handling the Motherboard or
other system components. Electrostatic discharge can easily
damage the components. Note that you must take special
precautions when handling the Motherboard in dry or air-conditioned
environment.
To protect your equipment from electrostatic discharge, take the
following precautions:
Ø
Do not remove the anti-static packaging until you are ready to
install.
Ø
Ground yourself before removing any system component from its
protective anti-static packaging. (To ground yourself, grasp the
expansion slot covers or other unpainted portions of the computer
chassis.)
Ø
Frequently ground yourself while working or use a grounding strap.
Ø
Handle the Motherboard by its edges and avoid touching its
components.
All manuals and user guides at all-guides.com
5
SY-7IZM