SOYO SY-P4S DRAGON Ultra User Manual page 90

II. Delete RAID
The following steps shall be taken to delete RAID.
1.
In the menu zone, select
confirm this operation and go to next.
2.
In the validated channel status, use the arrow key to select
the disk array to be deleted and press
3.
Press Y
the disk array?
III. Rebuild Mirror Array
The following steps shall be taken to rebuild the mirror array.
1.
In the menu, select
confirm.
2.
In the menu, select
Enter to confirm.
3.
In the validated channel status, select the source disk of the
mirror array and then press Enter.
4.
In the menu, select
Enter to confirm.
5.
In the validated channel status, select the target disk of the
mirror array and then press Enter.
6.
In the menu, select
Enter to confirm.
7.
Press Y
Continue?
Note:
When there is no RAID 1 array, system will prompt user
disks at the second step, and rebuild cannot continue.
IV. Add Spare Disk
The following steps shall be taken to add the spare disk.
1.
In the menu, select
confirm.
when warned Are you sure you want to remove
3. Rebuild Mirror
1. Select Source Disk: None
2. Select Target Disk: None
3. Start Duplication Process
when asked The last time rebuild not completed.
4. Add Spare Disk
2. Delete RAID, press
Enter
Array, press
86
Enter
to confirm.
Enter
and press
and press
and press
No enough
and press Enter
to
to
to