D. Mantel and Wall Projections
WARNING! Risk of Fire! Comply with all minimum clearances as specifi ed. Framing or fi nishing material closer than the mini-
mums listed must be constructed entirely of noncombustible materials (i.e., steel studs, concrete board, etc).
Note: The front of the Solaris is the side with access
to the controls.
FACING, MANTEL, CEILING OR
OVERHANG, UNLIMITED
DEPTH (COMBUSTIBLE OR
NON-COMBUSTIBLE)
SIDE VIEW
6 IN.
57-1/2 IN.
HEARTH OR FACING, UNLIMITED DEPTH
(COMBUSTIBLE OR NON-COMBUSTIBLE)
Figure 5.3 Solaris - Front Side
Finish Wall for Inside Door Fit
Minimum Alcove, Side Wall, Mantel and Overhang Dimensions
20
TOP VIEW
56 IN.
FRONT VIEW
56 IN.
Minimum 1 IN. clearance to facing or overhang
to permit door removal (sides and bottom).
Minimum 2-1/2 IN. clearance to facing or
overhang to permit door removal (top).
Heat & Glo • Solaris • 2179-900 Rev. E • 4/11
SIDE WALL OR FACING,
UNLIMITED DEPTH
(COMBUSTIBLE OR NON-
COMBUSTIBLE), PERMITTED
BOTH SIDES
57-1/2 IN.