Heat & Glo SOLARIS36-ST Owner's Manual page 67

B. Vent Components Diagrams (continued)
8-1/8 in.
(206 mm)
15 in.
(381 mm)
12-1/2 IN.
(318 mm)
Figure 16.5 SLP Series Vent Components
WARNING
Fire Risk.
• When using SLP-HRC-SS and SLP-HRC-ZC-
SS termination caps on top vented fi replaces,
a one foot minimum vertical vent section is
required before installing fi rst elbow.
• When using DVP-TB1 termination cap on top vented
fi replaces, a three foot minimum vertical vent section is required
before installing fi rst elbow.
13 in.
(330 mm)
SLP-HRC-SS
SLP-HRC-ZC-SS
HORIZONTAL TERMINATION CAP
16 IN.
406 mm
4-1/2 IN.
114 mm
9-3/16 IN.
(233 mm)
13-5/8
(346 mm)
SLP-LPC
LOW PROFILE CAP
Heat & Glo • Solaris • 2179-900 Rev. E • 4/11
Effective Length
5-1/2 in. 8-3/8 in.
5-3/4 to 8-3/8 in.
146 to 213 mm 140 mm 213 mm
3°
87°
16-11/16 IN.
424 mm
10-1/2 in.
267 mm
10-7/8 in.
276 mm
15 IN.
(381 mm)
16-11/16 IN.
(424 mm)
67