Installation Instructions; Warranty Information; Technical Support - Talon Pro User Manual

Chapter 1 Introduction

Installation Instructions

Unpack the Talon Pro system in a clean working area with Statusrate temperature control.
Confirm that the following items have been shipped with the system: power cable, user manual,
and warranty card.
Confirm that the voltage setting (AC 115/230V) is correct.
Confirm that the power input is stable and consistent. Install an uninterruptible power supply
(UPS) if necessary.
Make sure that the environment for the Talon Pro system is properly ventilated and free of dust,
excessive heat and humidity, and electronic interference.
Make sure the system is properly grounded. Do not attempt to defeat the third ground prong on
the power cable.
The system is shipped in professionally designed, foam-based external packaging. Please keep
and store this packaging for future transport or storage of the system.

Warranty Information

The Talon Pro system is guaranteed to be free from defect in materials and
workmanship for one year. The warranty is not applicable to defects or
malfunctions caused by misuse, accidents, or system changes by the end
user. Talon is not responsible for damages to data or related content by
the Talon Pro system.
NOTE: There is no need to fill out a warranty card as Talon keeps track of
all Duplicators by the serial number of the unit in a database.
Note: Talon assumes no responsibility for the illegal copying and
distribution of audio, video, and text/graphics data.

Technical Support

For detailed technical support or questions regarding the Talon Pro, contact Talon Technical
Support at 952.937.8354
2
Talon CD Duplicator