Emulate
The emulate operation is used to test both the master CD and the image in the specified hard
drive partition. It is a rarely-used operation, but is useful to test the system after it has been
transported and set up. This operation "emulates" a copy operation. Blank discs and source disc
information must be in place (either on a CD or in the selected partition of the hard drive) and the
system will act as if it is copying but nothing will be actually copied.
Compare
The compare operation is to be used with Data CDs only. It enables you to confirm that the data
on the master CD matches that of the copied CD.
Verify
The verify operation is to be used with audio and video CDs. It enables you to confirm that the
data on the master CD is OK for copying – either to a partition on the hard disk or to another CD.
External
The external operation is not used. It exists for future enhancements to the system involving an
external hard drive.
22
Talon CD Duplicator