Talon CD Duplicator
Copy x1
Emulate x1
Copy x2
Under some conditions, you may wish to reduce the writing speed of the
Emulate x2
CD writers. Switch to any of these copy or emulate speeds and the
writing speed of the system will be adjusted accordingly
Copy x4
Emulate x4
Copy x8
Emulate x8
Burn In
This function is used by the system developer to test the system. General users are to ignore this
function.
Update
This function is used by system developers to update the firmware of the system. General users
are to ignore this function unless instructed to do so by Talon service personnel.
When setup appears in the LCD display panel, press and hold the Status button to return to an operation
Status.
33