Other System Capabilities
Setup
To view the setup option, turn on the system. The system always displays an operation Status
(e.g., copy, load, emulate, etc.) at system startup. Press the Status button until it chirps. Then
release it. You should see the word setup in the display window, as shown below:
setup
<Statu
s
The setup option functions as a source for two menu lists:
§
Sub-Functions, and
§
Other System Capabilities.
With setup displayed in the LCD panel, press the Status button to view the menu list of Other
System Capabilities:
Edit
The edit function enables you combine tracks from different CDs onto one single CD. Refer to
page Error! Bookmark not defined. for a detailed procedure that describes how to use this
function.
Delete
When the last music track stored in the partition on the hard drive is not the one you wish to keep,
you can use the delete function to delete the last track.
Clear
Before you put selected tracks in a partition of the hard drive, you must first clear the partition
using the clear function. This process is described in the procedure starting on page Error!
Bookmark not defined..
32
Start>
Talon CD Duplicator