Talon Pro User Manual page 12

Making Multiple Copies from a Master Audio CD (continued)
Back to
"Copy" Status
Insert the
Master
Insert Blank
CDs
System
Automatically
Starts the
Duplication
Process
Pass/Fail
Status is
Displayed
8
5. Press and hold the Status button, release it when it "chirps", and note
that the copy Status is once again displayed.
copy
<Status
8. Place the Master CD in the first CD drawer. Use the Open/Close button
to open and close the CD drawer. The system will automatically start to
analyze the master CD and will display the size in megabytes and the
number of minutes on the CD.
9. Place a blank CD in each of the remaining drawers. Close each drawer
once you've inserted a blank CD. Note that the system automatically
starts counting how many CD drives have blank CDs in them.
copy
<Status
When you put blank CDs in all of the CD writers, the system automatically
starts the duplication process once it has detected that six drives are ready for
copying. The number following the L shows how many minutes of the
master have been read; the number following the C shows how many minutes
have been copied.
C49 C49 C49
L50 C49 C49 C49
When the system has completed the duplication process, all of the copied
CDs will be automatically ejected (the drawers will automatically open).
The system will indicate how many passed, and how many (if any) failed.
PASS 6 FAIL 0
L 51 C51 C51 C51
Talon CD Duplicator
448M51:01
6start>
44444