Status 2 Compare; Startup Command - Talon Pro User Manual

Talon CD Duplicator

Status 2 Compare

Under the ISO 9660 standard, a CD-ROM sector can be Status 1 or Status 2.
Status 1 allocates2048 bytes for user data, plus a third layer of error detection and error correction
codes. This is the Status that provides the highest integrity for computer data.
Status 2 allocates 2336 bytes for user data, and no third layer of error detection and error
correction. This Status is considered appropriate for segments of music, graphics and video,
especially in CD-ROM-XA and CD-I implementations.
If you want to verify that the information on the master CD matches that on the copy, then set this
sub-function to Yes, and the system will compare the two. The default for this sub-function is
No.
Status 2 compare
[*] No
Options:
No (default)
Yes

Startup Command

You can set the system up so that the startup operation Status is always the same. In most cases,
users will want copy as the startup command. However, you may set the system to start with any
of the operations listed as options below.
startup command
[*] copy
Options:
copy
copy+comp
emulate
compare
format
test
quick erase
full erase
verify
external
[Q]
[Q]
31