Operation Status Details; Copy - Talon Pro User Manual

Operation Status Details

Copy

Use the Copy operation Status to copy from a partition on the hard disk or from a master CD
placed in the first CD drive. Before actually starting the copy operation, check your sub-function
settings. Here's how:
Press and hold the Status button until it "chirps." Then, when setup appears, press the Start
§
button to review each sub-function setting. Use the Status button to change any sub-function
setting.
If you are copying audio and graphics or text, make sure the CD+G sub-function is set to Yes.
§
Press the Start button until you can view the setup sub-function in the display panel. Then
§
press and hold the Status button until it "chirps" to return to the copy operation Status.
When copying from a master CD, place the master in the top CD drive and blank CDs in the
remaining CD drives. The full procedure for copying an audio CD is provided starting on page 3.
A full procedure for copying a Karaoke CD or any CD with text and/or graphics is provided
starting on page 11.
20
Talon CD Duplicator