Talon Pro User Manual page 17

Talon CD Duplicator
Copying Karaoke CDs (continued)
Back to the
Operation
Status Display
Insert the
Karaoke
Master CD
Insert a Blank
CD
System
Automatically
Analyzes the
Operation
Begin the
Copy Process
10. Press and hold the Status button until it "chirps." Then release the
Status button. Note that the default operation Status is displayed. If not
already displayed, press the Status button until copy is displayed:
copy
<Status
11. Place the master CD in the first CD drawer. Use the Open/Close button
to open and close the CD drawer.
12. Open the second CD drawer and place a blank CD in it. Close the
drawer (using the Open/Close button).
Once you've placed the CDs in their respective drawers, you will hear the
system start up. It will automatically scan the master CD to determine the
size and the duration of the master CD. Look for this information in the
LCD Display panel. It should look something like this:
copy
<Status
In the above example, the master CD is 448 Megabytes, and is 51 minutes,
and 01 seconds in duration, 51:01.
The 1start> prompt indicates that the system is Starting to make one copy
as soon as you press the Start button.
13. Press the Start button. The system will Start the copying process. Note
that the LCD display shows L and C status codes. These indicate how
many minutes have been read (L) and how many have been written (C).
When the copy procedure is finished, you will hear a three-tone beep,
the second drawer will automatically open, and the LCD panel will
indicate that one CD passed, and that zero CDs failed the operation. For
example:
PASS 1 FAIL 0
L 51 C51
448M51:01
1START>
13