Feed Stop; Feed Auto Stop - Grizzly G0613/G0614 Owner's Manual

Feed Stop

It may be necessary to adjust the feed stop
before you make blade adjustments. The blade
should never rest on or rub on any part of the vise
assembly. Also, the over-tilt stop may be adjusted
to stop the bow from being lifted past 40°, causing
machine instability and hydraulic cylinder dam-
age.
To adjust the feed stop bolt:
Adjust the feed stop bolt and jam nut (Figure 51),
so the bandsaw blade teeth are just below the
vise table surface when the cut is complete.
Feed Stop
Over-Tilt Stop
Figure 51. Feed stop bolt.
G0613/14 Swivel Mast Metal Cutting Bandsaw

Feed Auto Stop

It may be necessary to adjust the auto stop after
you have removed the limit switch for adjustment
or maintenance.
To set the auto stop:
Adjust the auto stop bolt and jam nut (Figure
52), so the bandsaw blade teeth are just below
the vise table surface when the saw blade has
completed its cut.
Feed Auto Stop
Figure 52. Feed auto stop.
-39-