Grizzly G0613/G0614 Owner's Manual page 24

5. Use the chart shown in Figure 17 as a guide
to quickly position the workpiece between
the vise jaws correctly and to avoid slipping
during a cut. DO NOT CUT STEEL THAT
IS STACKED OR BUNDLED. One or more
workpieces will slip and damage the saw
blade.
-22-
���
�����������
Figure 17. Vise clamping options.
Always turn the saw OFF and allow the blade
to come to a complete stop before using the
vise! Failure to follow this caution may lead
to injury.
�����������
G0613/14 Swivel Mast Metal Cutting Bandsaw