Connecting The Camera To An Broadband Router With Local Area Networking - Samsung SNB-3000P User Manual

network connection and setup
ex3) If the address (LAN IP) of the Broadband Router is 192.168.xxx.1
IP address: 192.168.xxx.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.xxx.1

M
For the address of the Broadband Router, refer to the product's documentation.
Checking if the Broadband Router is connected to the xDSL/Cable
modem properly
Select <Status> from the Settings menu of the Broadband Router
If it is properly connected, <IP Address>, <Subnet Mask> and <Gateway>
provided by your ISP are displayed. Please remember these values because they are
required so that an external remote computer of the Broadband Router connects to
the camera. However, note that certain ISPs change the settings of <IP Address>,
<Subnet Mask> and <Gateway> on a regular basis
If the Broadband Router is not properly connected, press the [Connect] button to try
to reconnect or check if the settings of the Broadband Router are correct.
CONNECTING THE CAMERA TO AN BROADBAND ROUTER
WITH LOCAL AREA NETWORKING
This is for a large network environment such as corporate office, building, public office and factory.
SNB-3000
SNB-3000
Local PC
Configuring the network settings of the local PC connected to an
Broadband Router
Configuring the network settings of the local PC connected to an Broadband Router, follow
the instructions below.
32_ network connection and setup
Switch
HUB
Broadband
Firewall
Router
Local PC
INTERNET
External Remote PC
DDNS Server
(Data Center, KOREA)