Table of Contents
Advertisement
setup screen
To check the log information
Select <System> - <Log>.
The Log information list appears.
System log list : Shows the log
information about the system changes
along with time and IP address.
-
System started: When the camera
turns on
-
User login: When the user logs in to
the camera
-
System reset: When the camera restarts
-
Network is up: When accessing the network
-
Network is down: When not accessing the network
-
Video param. changed: When the video related parameters are changed
-
System time changed: When the system time is changed
-
Network confi guration change: When the network related confi gurations are changed
-
Alarm occurrence 1, 2: When an alarm is generated
-
Intelligent Video Analysis occurrence: When an intelligent video analysis event is generated.
-
FTP send error: When FTP transfer failed
-
SMTP send error: When sending e-mail message through SMTP server fails.
M
The maximum of 2000 logs can be recorded.
If the log number is over 2000, the log in the bottom of the log list will be replaced with a new log.
To update the software
Select <System> - <Software update>.
The Software update window appears.
How to update the software
1.
From the software update window,
click [Browse...].
The Open dialog appears.
2.
Select an updatable fi le and click
[Open].
3.
From the software update window,
click [Install].
The selected fi le will be unzipped with a
start of the update.
It may take a several minutes to
complete the update.
56_ setup screen
Hide quick links:
Advertisement
Table of Contents
