Table of Contents
Advertisement
ex3) If the address (LAN IP) of the Broadband Router is 192.168.xxx.1
IP address: 192.168.xxx.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.xxx.1
M
For the address of the Broadband Router, refer to the product's documentation.
Checking if the Broadband Router is connected to the xDSL/Cable
modem properly
Select <Status> from the Settings menu of the Broadband Router
If it is properly connected, <IP Address>, <Subnet Mask> and <Gateway>
provided by your ISP are displayed. Please remember these values because they are
required so that an external remote computer of the Broadband Router connects to
the camera. However, note that certain ISPs change the settings of <IP Address>,
<Subnet Mask> and <Gateway> on a regular basis
If the Broadband Router is not properly connected, press the [Connect] button to try
to reconnect or check if the settings of the Broadband Router are correct.
CONNECTING THE CAMERA TO AN BROADBAND ROUTER
WITH LOCAL AREA NETWORKING
This is for a large network environment such as corporate office, building, public office and factory.
SND-3080CF
SND-3080CF
Local PC
Configuring the network settings of the local PC connected to an
Broadband Router
Configuring the network settings of the local PC connected to an Broadband Router, follow
the instructions below.
Select : <Network Neighborhood>
<Properties>
<Obtain an IP address automatically> or <Use the following IP address>.
Broadband
Router
Local PC
<Properties>
<General>
<Internet Protocol (TCP/IP)>
INTERNET
External Remote PC
Firewall
DDNS Server
(Data Center, KOREA)
<Local Area Connection>
<Properties>
English _31
Advertisement
Table of Contents
