Table of Contents
Advertisement
setup screen
To set the Intelligent Video Analysis
1.
Select an Intelligent Video Analysis
mode.
2.
Set whether to use the Intelligent Video
Analysis function.
3.
Set whether you want to use the
overlay or not.
4.
Select a sensitivity level of the camera's
object detection.
5.
Specify the event rules.
6.
Specify the activation time and activation
condition.
For more information about <Activation
time> and <Action>, refer to "Alarm input".
(page 62)
7.
When done, click [Apply].
J
Motion Detection and Intelligent Video
Analysis cannot be used simultaneously.
If camera is capturing a close object, the video analysis capability may degrade.
M
In the following cases, the video analysis function may not produce proper result on confi gured
event and motion detections.
- The subject color or brightness is similar to the background
- Multiple random movement continues due to scene change or other reasons.
- When object that is fi xed continues to move in the same position.
- An object hides other objects behind.
- 2 or more objects overlaps or 1 object splits into multiple objects.
- Too fast object (for detection, one object should be found overlapping between contiguous
frames).
- Refl ection / blur / shadow due to direct sunlight, illumination, or headlamp
- In severe snow, rain, wind or in dawn / dusk
- Moving object approaches to the camera too close
64_ setup screen
Hide quick links:
Advertisement
Table of Contents
