Samsung SNB-3000P User Manual page 52

setup screen
- MAC address : Displays the Ethernet MAC address.
This is used for creating a DDNS address.
- IP address : Displays the current IP address.
- Subnet mask : Displays the <Subnet mask> for the set IP.
- Gateway : Displays the <Gateway> for the set IP.
- DNS server : Displays the DNS(Domain Name Service) server address.
- HTTP webserver port : HTTP port used to access the camera via the web
browser. The default is 80(TCP).
- Upload port (TCP) : Used to upgrade the software fi rmware, defaulted to 60004(TCP).
IPv6 confi guration : Obtains the IPv6 address to access the IPv6 network.
VNP confi guration : Set a port used to transfer video signals with the Samsung
protocols.
- Device port (TCP) : Used to control the video signal transfer, defaulted to 60001(TCP).
- TCP streaming port : Video signal transfer port using TCP protocols, defaulted
to 60002(TCP).
- UDP streaming port : UDP Port used to transfer video signal with the UDP
Unicast protocols. The default is 60003(UDP).
- Multicast address : IP address used to transfer video signal with the UDP
Multicast protocols.
The default is 225.128.1.128, and if you want to change the address, specify it
ranging from 224.0.0.0 to 239.255.255.255.
- Multicast port : UDP Port used to transfer video signal with the UDP Multicast
protocols. The default is 60005(UDP).
- TTL* : Set the TTL for the VNP packet.
The default is 63, and if you want to change the address, specify it ranging from
0 to 255.
RTP confi guration : You can set the RTP protocol.
- RTSP port : You can set the RTSP port.
- Streaming port : Used to transfer video signal with the RTP protocols.
The default range is between 61000 and 61999.
- Multicast address : IP address used to transfer video signal with the RTP
protocols.
- Multicast port : Used to transfer video signal with the RTP-protocol multicasting.
- TTL* : You can set the TTL for the RTP packet.
2. When done, click [Apply].
Your settings are saved and the system restarts.
The currently opened web browser will be closed.

M
If the Broadband Router has more than one camera connected, you should confi gure IP and port
settings differently with each other.
52_ setup screen